How to rotate entire revit model [Expert Approved]



Last updated : Aug 6, 2022
Written by : Madie Spella
Current current readers : 4861
Write a comment

How to rotate entire revit model

How do I rotate a whole Revit model?

Click Manage tab Project Location panel Position drop-down (Rotate Project North). In the Rotate Project dialog, for Maintain text note orientation during rotation, select this option if text notes should remain oriented to the view. Clear the option if text notes should rotate with the model.

Can you rotate a model in Revit?

Select the elements to rotate, and then click Modify | tab Modify panel (Rotate). Click Modify tab Modify panel (Rotate), select the elements to rotate, and then press Enter . Selecting the Rotate after placement option on the Options Bar when placing a component.

How do you rotate a project orientation in Revit?

Click Manage tab Project Location panel Position drop-down Rotate Project North. In the Rotate Project dialog, select the desired option. Click OK.

How do you rotate a 3D model in Revit?

In the Project Browser, right-click the 3D view name, and select Show Camera. The hollow blue dot is the focal point and the pink dot is the target point. Drag the camera to modify the camera level. Drag the hollow blue dot to modify the focal point around the axis of rotation (the target point).

How do you rotate a view in Revit 2022?

Double-click in the viewport to activate the view. On the View Control Bar turn on the visibility of the crop region. Select the crop region, and on the Modify tab, click Rotate.

How do you rotate a sheet view?

After a view has been placed on the sheet, select the view. On the Options Bar, use the drop-down arrow to set the Rotation on Sheet. Rotate the view clockwise or counterclockwise in 90 degree increments. This will rotate the whole view, and the title mark associated with the view.

How do you rotate a model to True North?

You can rotate the model to reflect True North. Open the site plan view. Use the survey point to set a known position on the site. Change the view's orientation: In the Properties palette, for Orientation, select True North.

How do you rotate a family in Revit?

Click on the adaptive point (you'll need to tab it a little) Turn off instance parameter “driven by host” Rotate into any position. If needed, set workplane on which you want to rotate and rotate again.

How do you change an angle from True North to project north in Revit?

You can rotate the model to reflect True North. Open the site plan view. Use the survey point to set a known position on the site. Change the view's orientation: In the Properties palette, for Orientation, select True North.

What is the difference between True North and project North in Revit?

The Project North is a virtual orientation used to model your project. so it is orthogonal to your screen. By default, in every file there is Project North. The True North is a real-world north used to properly locate the orientation of your building.

How do you rotate a 3d section box in Revit?

Open the project view that contains the section (callout) or scope box to rotate. Select the section (callout) or scope box. Click Modify tab Modify panel (Rotate). Rotate the view.

How do I move around in Revit?

Select the elements to move, and then click Modify | tab Modify panel (Move). Click Modify tab Modify panel (Move), select the elements to move, and then press Enter .

How do you rotate an elevation view in Revit?

Go to the Modify panel and select the Rotate command. The little rotate icon will appear at the center of the elevation marker. Pick on that little rotate icon and move it to a point on the desired wall.

How do you rotate a view in Revit but not the title?

  1. Rotate the view itself by rotating a scope box not on the sheet but back in the view. This results in rotating the view on the sheet and leaving the title horizontal.
  2. An alternate approach is described here: View Titles for Views Rotated on the Sheet.

How do you rotate a title block in Revit?

On the Options Bar, use the drop-down arrow to set the Rotation on Sheet. Rotate the view clockwise or counterclockwise in 90 degree increments. This will rotate the whole view, and the title mark associated with the view.

What is True North in Revit?

True North is the real-world north direction based on site conditions. Tip: To avoid confusion, define True North only after you begin modeling with Project North aligned to the top of the drawing area and after you receive reliable survey coordinates.

How do you change axis in Revit?

Click and hold down the Orbit wedge. The cursor changes to the Orbit cursor. Drag to rotate the model. Release the mouse button to return to the wheel.

How do you rotate a Z axis in Revit?

If you select the fitting, an array of little icons will appear. Two of the icons will look like arrows pointing in a circle. By click these you can rotate the element 90° clockwise or counter-clockwise.

How do you redefine a work plane in Revit?

  1. Select a work plane-based element in a view.
  2. Click Modify | tab Work Plane panel (Edit Work Plane).
  3. In the Work Plane dialog, select another work plane.
  4. If needed, reposition the element on the work plane.

What is magnetic north and True North?

True north is a fixed point on the globe. Magnetic north is quite different. Magnetic north is the direction that a compass needle points to as it aligns with the Earth's magnetic field. What is interesting is that the magnetic North Pole shifts and changes over time in response to changes in the Earth's magnetic core.


more content related articles
Check these related keywords for more interesting articles :
How to create cnc design
How to unlock element in microstation
How to import altium library
3d graphic design meaning
How to number sheets in altium
Microstation how to divide a line
How to save revit file as central model
How to import gerber files into kicad
How to change tolerance in revit
Product modeling in hybris
Revit how to change dimension precision
Interior design courses in uae
Microstation how to center text
House model images photos
How to cut solid in microstation








Did you find this article relevant to what you were looking for?


Write a comment




How to rotate entire revit model


Comment by Eugene Yellowhair

hey guys welcome arctic here and when it comes to Revit the beginner is one of the most common questions is how do you rotate views in Revit so most rabbit users are come from AutoCAD or some sort of a 2d drafting software like that and when it comes to working in AutoCAD rotating views is well it's quite simple you just select and you rotate and you're done well in Revit it's a bit more complex because Revit tends to have a mind of its own or actually it's just a different system so as soon as you understand how it works it's really simple and it can be way more efficient than working with any other drafting software so in today's tutorial I'm going to be showing you how to rotate views in rabbit and how to rotate different types of views for different applications now if you're a beginner and if you're interested in completely learning Revit and how to start working and completing your own complex projects in rabbit I have a whole course on that topic I can see 60 and our beginner to intermediate course and it's available on my website Vulcan Arctic comm it's going to be the first link in the description of this video also if you're interested in my Revit project files check out my patreon that's going to be the second link in the description of this video ok so without any further ado let's get into rabbit and let's start rotating those views so let's go so here we are in Revit and this is the building that I'm going to be using for at this demonstration it's just a simple brick house okay so when it comes to rotating views it's a bit more complicated than just selecting something and rotating it and you have to understand how rabbit tends to look at your views and your whole project orientation so here we have some floor plans and then we also have the site plan now these are different so usually you're going to present at the site plan where the building is going to be rotating according to its well orientation and space so usually your building is really rarely going to be like this just vertical from north to south usually it's going to be kind of it's going to have some sort of an angle now in most cases for your site plan what people tend to add is the North arrow symbol and I'm going to do that in this project because it's going to make it easier later on so let's go here to the annotate tab and then for these symbol so here the last panel is the symbol panel we go to the symbol tool and one of the options that they loaded n is the North arrow one this is the North arrow family and then I can just place it like this okay I'm going to hit the Escape key a couple of times and this is just an annotation element which helps us orient ourselves and space and then of course it's never again as I said it's going to be straight up so let's go to rotate and let's then rotate that a little bit like this let's go with 33 degrees okay so now what do you do when it comes to when it comes to your project orientation how does this work so for your site plan you want that to be angled like that that your North arrow is facing up and then your building is going to be at and which ever angle that's going to be at and that's going to be set up at your TrueNorth now your floor plans on the other hand are going to be set up at a project north so that's what ever orientation works best for you so in this case its oriented like this later on I'm going to show you how to change the orientation but for now let's just leave it like this but the most important thing is to note that here in the properties so for this level one view the orientation is set to project North instead of true north now your site plan in most cases should be set up instead of a project North to true north now once you make that setting now we have to kind of rotate our project so it truly faces north so how do you do that well it's quite simple actually here in the middle we have the project base point and I'm just going to move that out of the way oops let's go back select that project base point on a clip at first and then you can kind of move it out of the way place it there and then we can clip it back in place and here we have our survey point as well we can clip it or unclip it so anyways what you can do here is to go to your manage tab and then on the manage tab we have the project location so for the project location we have the position and then we have the rotate TrueNorth now this tool will allow you to rotate the true north of your project so it's going to rotate our project so it's facing true north and our North arrow it will be facing up so when you select that as you can see you get this little curve and basically a rotate option but it's placed over here and we have this little blue dot in the middle now you can select that blue dot and you can place it wherever you want and I like to place it here on the North arrow so now what they like to do is just to come over here to the project and just go at the angle of the North arrow and then you just want to kind of fix it up so just go make sure to rotate it up and then as you can see the whole project will kind of all rotate around and now our North arrow is facing up and we have the true north orientation here in our in our site plan now if we go back into level one as you can see nothing has really changed here in LA one but if we decide to change orientation here and if we change this to true north it's going to go like this so that's of course not what we want to have we want to go back here to project north now also what we might want to do in this case is to maybe change the orientation of this particular view because as you can see a rabbit has kind of a widescreen view for your modeling and this is a quite a vertical building so it would make sense but to have it horizontally sitting here so you can kind of zoom in a bit more and have more of the building in view so what you can do in that case is go here to the properties panel scroll down a little bit and make sure to turn good to go to extents and turn on the crop view and the crop region visible this will give you Canidae the crop view for your view you can crop it if you want you don't have to in this case I'm going to crop it just a little bit but now when you select that crop view you can go to rotate you get your basic rotate tool and then if I rotate this by the value of 90 degrees as you can see now it's horizontal and now I can continue working on this now keep in mind that we did this with level 1 if I go here to level 2 level 2 has basically stayed the same so it's not going to affect other views if you rotate the orientation of your view so this one has been kind of set up to be horizontal that we can do the same thing for level 2 but of course we don't have to and then of course as you can see now if we zoom in the whole building is in view and it's a bit easier to work with again if we go back to side plan side plan is back at this orientation of course you can go back to side plan scroll up a little bit find true north and set it to project north and that's going to kind of bring it back to the original view but actually I want true no


Thanks for your comment Eugene Yellowhair, have a nice day.
- Madie Spella, Staff Member


Comment by Nickolas

hey guys so I want to do a quick tutorial on rotating a model for visual representation not necessarily rotating the D model elements but more for more rotating the views and stuff like that so that you can visually represent or see a model for coordinating or whatever the reasons are if you want to show a site and how it's actually rotated then this is this is kind of how you would do that and the first part is to open up open up a plan view so it doesn't matter what model you have in this example I just opened up a project and threw some walls and that is a door to it so we can see the rotation when it when it's applied and this one if we just open up a level one plane view we can apply a prop and then we'll need the region visible and we simply just grab it and then press the ro quick key command or we come up here and do the rotate command button and then we can rotate it and see that it rotates it we create another plan you know what if we just open up a 3d and the press WT do a window tile we can come up here and see when we do this command then nothing happens to this model it nothing happens to the original location of the model this is just so that we could visually see it and we can take a plan like that and then open up a sheet and we can actually grab it and place it on there and it's going to give you that rotation for that and you can also get into it and rotate it from here as well so play around with it see you know what best works for you another cool thing is is if we give into this I'm gonna create a new floor plan so up here on the View tab I'll just quickly press the plan view button on the create panel and I wanna check the duplicates click this level one press ok and then I got another another plan of view I'll close this one Oh maximize this one and what I'll do is I'll draw a scope box a bit and then I can I'm just going to call it scope box you can give it specific names if you have a number of scope boxes throughout the project and you can actually rotate it right now here's a rotation rotate it and when you apply the scope box to the actual view it'll give it its it some rotation so you saw that it rotate today and one thing is is if is it as soon as you place it and then rotate it it's gonna rotate from that point so before you draw it make sure you have it the way that you want because it serves your place and rotate it so we don't rotate the dividuals of it so you can rotate it and then you reapply it again and then you got your rotation you see that you can't necessarily rotate you can rotate this and it's not going to do anything we kind of move it around on the screen but you can come to this view kind of get an idea of the rotations and stuff so grab your your scope box and then just grab this rotation tool kind of rotating see what you you you get you could then open up a sheet and place that view and it has the rotation that that you've given it within the plane view you can also do a rotate plan north and if you open up let's do another new plan so we'll do a floor plan we'll move their duplicates love for one okay will maximize it I'm going to do a control H real quick just to hide that scope box and if we come over here to the manage tab you can see over here we have some options and we have position before we rotate through north we actually have to change the orientation of this this plan to a true north because if we rotated it right now it actually be rotating in the project north and generally the project north is set up when you begin a project because it's gonna be the primary the pretty much the primary working view that you're gonna be doing on your work in the visual representation of the building direction that's kind of what's gonna be set up within the project north and then in the true north it would be something that we would represent on a site plan or whatnot but if we came over to the orientation button we can actually do a drop down and changes to north and you can see I've already rotated it and if we come to the position we can move this around and we can do that to do a place you can impress this to do the default which is the original location you can grab the little circle and move it that way then we could just do a simply rotate and it rotates in that way and it only applies it to these true north of views so we can for example open up this sheet view and grab this tool or we can see that's the location that we just had given it I'm gonna close these out of views wt4 window tile and we can see the true north is is this one we can actually grab it and then see that the only orientation is to North you can set it to project north and now it's gonna reapply that the project North original location of the building to that view so it's a quick way to kind of go back and forth to the project and the working views to an actual true north location of your building so that's one way to rotate it I would recommend using that to actually rotate it to a North of the building so that you can use it for sites and different things like that it could be you know a quick way to get in there and just rotate it so you can visually you know see what it looks like and mess with it but really it's whatever works for you so I hope this helps you know just keep in mind there's there's multiple ways of doing something each has their their reasons for doing it that way and each one has a workflow that goes along with it and you know is applied to the projects and stuff so try them see see how they all work see what areas they can be applied to and how you know in different workflows and stuff like that and do let me know if this video helped you and I really appreciate you watching thanks a lot


Thanks Nickolas your participation is very much appreciated
- Madie Spella


About the author