How to draw schematic in easyeda [Last Infos]



Last updated : Sept 21, 2022
Written by : Boyd Arnhold
Current current readers : 4624
Write a comment

How to draw schematic in easyeda

How do you draw a line in EasyEDA?

  1. Click the “Sheet Setting” button at “Drawing Tool”.
  2. Click “Add Custom” button.
  3. It will create a new symbol editor, you can edit the table by line as you want, as below:

How do you use EasyEDA for beginners?

  1. How to set the resistance of a resistor.
  2. Where Can I find the Probe/voltage probe?
  3. Why I can't simulate my schematic.
  4. How to ask for help and get an answer.

Can you simulate circuit in EasyEDA?

The circuit simulation program that EasyEDA uses is called ngspice.

How do I place components in EasyEDA?

Find the component which you plan to place to your schematic at “Libraries”, then move your mouse to the canvas and left click. If you want to add more, just left click again. To end the current sequence of placements, right click once or press ESC .

How can I edit a component in EasyEDA?

  1. You can edit the pad size, shape outlines, etc. when you finish and save, it will be saved to your personal libraries “Created” and become your personal libraries. ​
  2. Modify the saved Footprint tag at “Library” part list.

How do you make a custom PCB shape in EasyEDA?

  1. Create a new project in your workspace. File save the schematic.
  2. Right click on the project name, and "New PCB" OK the defaults (100x100mm)
  3. Import the board outline.
  4. Import the silk screen image.
  5. Check the results by previewing the 3D preview.

Is EasyEDA safe to use?

Is EasyEDA safe? There are no absolutely secure things in the world but even if you have the misfortune - as happened to one of our team - of losing one laptop and having two hard drives break, EasyEDA will try to protect your designs in following ways: We utilize SSL throughout the entire domain EasyEDA.com.

How do you build a PCB circuit?

  1. Understand the electrical parameters.
  2. Creating the schematic.
  3. Use a schematic capture tool to create your PCB layout.
  4. Design your PCB stackup.
  5. Define design rules and requirements.
  6. Place your components.
  7. Insert drill holes.
  8. Route the traces.

Is EasyEDA Open Source?

[news] Celebrate EasyEDA open source hardware platform oshwlab online operation! The kxmx_bluemchen_1u is a open source, 22HP 1U, Eurorack module powered by the Electrosmith Daisy Seed. The kxmx_bluemchen_1u is a open source, 22HP 1U, Eurorack module powered by the Electrosmith Daisy Seed.

What is EasyEDA PCB?

EasyEDA is an easier and powerful online PCB design tool that allows electronics engineers, educators, students, makers, and enthusiasts to design and share their projects.

How do you start a simulation?

  1. Set breakpoints.
  2. Run the simulation step by step.
  3. Continue the simulation to the next breakpoint or end.
  4. Examine data.
  5. Perform other debugging tasks.

How do I add a library to EasyEDA?

  1. Select Open->Eagle… from the Folder icon.
  2. Click the “Select file(s)…” button and select the EAGLE Library File from the Downloads folder i.e. the *.
  3. Check both boxes next to the symbol and footprint icons, and then click the “Add to My Library” button.
  4. Click OK after successful import.

Is EasyEDA Pro free?

Feel free to use EasyEDA because we promise EasyEDA's core features are absolutely free for everyone. Although the great core features of EasyEDA will always be free, by choosing to pay a monthly subscription of a few dollars you can help us build an even better PCB design tool.

How do I import a project into EasyEDA?

If you only want to import the PCB, you just need to ZIP the PCB file and then import it. If you want to import the schematic, you must ZIP the schematic and symbols together, we suggest using the KiCAD archive tool when opening the project in KiCAD, it will include the symbols in the ZIP file automatically.

How do you autoroute in Easyeda?

If you want to route a track and use “L”, and the then press “+”, you will get two different size track segment. or press “SHIFT+W”.

How do I change my footprint in Orcad?

To edit an existing footprint, select that footprint from the list on the left side of the screen. The footprint will appear in the work area to the right. After you have completed your edits then select the “Save As… ” button to save the edited footprint with a new name in your custom library.

How do I change my footprint in Altium?

Right-clicking on the top-level entry for a footprint itself, in the Explorer panel, or right-clicking on the footprint entry in the Components panel will edit the latest revision of that footprint.

How do I add 3D model to EasyEDA?

  1. Draw or download 3D model. Note: currently only 3D models in “WRL(VRML)” and “obj” are supported.
  2. Create a new 3D library. in “Top Meun - New - PCB 3D Lib”.
  3. Import 3D model. You can check which 3D model you want to import.
  4. Specify the 3D model.

How do you make a single layer PCB in EasyEDA?

Layout Single Layer PCB There are two methods: Method 1: Route the track and copper on the bottom layer, and without placing via. If you are using the footprints which have the multi-layer pads, that will appear on the top and bottom layer, then you need to change all multi-layer pads “Plated” as “No”.

How do I change the schematic symbol in EasyEDA?

  1. Select a symbol.
  2. Click the Group/Ungroup Symbol… button.
  3. Edit the shape or pin what you want to change.
  4. Select all of the items and click the Group/Ungroup Symbol… button.


more content related articles
Check these related keywords for more interesting articles :
How to uninstall autodesk software
How to create geometry in revit
Unity non photorealistic rendering
How to use guid in revit
House md season 1 actors
3d model doll face
How much money do models make a day
How to make dice in tinkercad
How to set true north revit
Software architecture question paper
Pcb design course uk
Revit how to dimension line
Pcb design supplier china
How to create hatch vectorworks
3d model poser software








Did you find this article relevant to what you were looking for?


Write a comment




How to draw schematic in easyeda


Comment by Lenore Batchelor

okay guys it's me imart from nelson darwin park tech youtube channel in this video tutorial we will learn about how to make a simple circuit within the easyeda.com online simulator for it first of all you must know that easy eda is a totally open source and easy to use online simulator and you can open it by writing easy.com in google after it you will see this window and you need to click to change to simulation mode okay now after it we need to go to our new and uh project we can write simple circuit here and we will click on save okay now we got our main window okay now we need to zoom it a little bit so we can get it we can get a better view so take it to 100 then click on doubly library here we will see a lot of components okay now so we will take our led first of all okay you just need to click on led and then click on the main window okay now this is our led now we will take our spst that is single pole single throw our switch okay now this is our led and the server switch then we need a power supply that is the dc power supply okay we can go and take this dc power supply okay now we need to connect this switch with dc power supply now like this and led anode end with the other end of the switch then we need to connect led cathode with the negative side of the supply so this is our circuit but we have left one thing that is called as the ground and ground must be connected with the lower end of the uh or negative end of the power supply okay now what we need to do is to change the color of led that is green you can use any other color if you want okay also click on the dc voltage source and we will click on and we will write 5 volt okay now we need to run our okay it says that first save our file so we will save it out now we will run it now it says transition 10 milliseconds so we can double click on it we can change it to 10 that is 10 seconds so okay now now we will run it now as we can see that our switches open so our led is not on okay so it is open now we we need to make our switch close now when we will run it our led is now on so this is a very very simple and basic circuit for beginners so hopefully you can make and run the simulation inside your easy eda simulator so don't forget to subscribe and thanks for visiting our channel you


Thanks for your comment Lenore Batchelor, have a nice day.
- Boyd Arnhold, Staff Member


Comment by Son

he had on request to make an easy


Thanks Son your participation is very much appreciated
- Boyd Arnhold


About the author