How to change length in sketchup [Best Answer]



Last updated : Aug 15, 2022
Written by : Dorthea Hores
Current current readers : 9757
Write a comment

How to change length in sketchup

How do you set lengths in SketchUp?

Select the Move tool ( ). Hover the Move tool cursor over one of the line's end points. Click and drag the end point to change the line's length.

How do I change the length of SketchUp for free?

  1. With your model open in SketchUp, select Window > Model Info.
  2. In the sidebar on the left, select Units. The Units panel appears.
  3. From the Format drop-down list, select your desired unit format: Architectural, Decimal, Engineering, or Fractional.

How do I set length and width in SketchUp?

Type a length value, a comma, a width value, and then press Enter. For example, type 8',20' and press Enter. If you type only a number or numbers, SketchUp uses the current document units setting. You can also override the document units setting by specifying imperial (such as 1'6") or metric (such as 3.652m) units.

Why can't I change Measurements in SketchUp?

You need to have the Dimension tool or an existing dimension selected in order to make any changes. Units in Document Setup only affect the displayed paper space dimensions shown in the Measurements window when you are drawing in LO or moving entities.

What is length snapping in SketchUp?

Length snapping causes newly drawn lengths to snap to your specified value, but precise placement and alignment still depend on where you started and how you draw. There are two ways to assure precise measurements in SketchUp, neither of which involves length snap: Type input measurements while drawing.

How do I change the length of my shape?

To edit a placed dimension, double-click the value to activate the field, then enter the new value. Press Enter to accept the change.

How do you extend and trim in SketchUp?

Select the Line tool. Hover the mouse pointer over the edge you want to extend, then press the Shift key to 'lock' the Line tool to draw along the edge, and draw out the edge to extend it.

How do I change the focal length in SketchUp?

  1. Select the Zoom tool or press the Z key. You can also select Camera > Field of View from the menu bar.
  2. Type a value in degrees or millimeters, respectively. For example, typing 45 deg sets a 45 degree field of view; typing 35 mm sets a focal length equivalent to a 35mm camera.

How do I change the units of measurement in layout?

  1. Click the Tools menu and click Options.
  2. Click the Layout View tab.
  3. Adjust Page units to the desired unit. The status bar displays the pointer position in the chosen units.
  4. Click OK.

How do I change dimensions in SketchUp 2021?

Editing dimension text Double-click the dimension. Or select the dimension and press Enter. To open the text box for editing, double-click the dimension text box. Or select the text box and press Enter.

How do I change aspect ratio in SketchUp?

  1. Context-click and select Edit Camera. The Camera Properties dialog box appears.
  2. Modify properties as needed. See the upcoming list for details about your options.
  3. Click OK.

How do you split length in SketchUp?

  1. Context-click a line or arc.
  2. Select Divide from the context menu. SketchUp place points on the line or arc to show where it will be divided.
  3. Move the cursor toward the center of the line or arc to reduce the number of segments.
  4. Click the line when the number of segments you would like is shown.

How do you measure the length of an irregular shape?

If a shape is irregular then it has angles that are not all the same size. To find the perimeter of an irregular shape, we simply add up each of its outer sides. units. will be a length measurement (e.g. centimetres).

How do you transform a shape?

There are different kinds of transformation. Rotation is when the shape is turned around a point. Reflection is when a shape is reflected in a mirror line. Translation is when a shape is moved a certain distance from its original position.

Can I extend a line in SketchUp?

You can use the Move tool to extend a single line at a time, for what that's worth. With nothing selected, activate the Move tool and hover the cursor over an ent point. You can then click and move the end point (with the typical SketchUp features for typing a distance, inferencing, inference locking, etc.).

Is there a stretch command in SketchUp?

When you move geometry that's connected to other geometry, SketchUp stretches your model. To stretch your geometry, select the Move tool ( ) and click and drag any of the following: An edge. A face.

What is trim and extend?

The Trim and Extend commands are two of the most commonly used functions in AutoCAD. They save us time and allow us to modify our objects automatically. These invaluable tools have been updated in AutoCAD 2021 with a “quick” mode.

How do you change eye height in SketchUp?

Select the Position Camera tool ( ). Click a point in your model, and SketchUp places the camera's point of view at 5' 6" directly above the point you click. (Optional) If you want to make the eye height taller or shorter, enter a new value and press Enter.

How do I change the units in layout in SketchUp?

In SketchUp Desktop: You can change units in SketchUp (desktop) by going to Window > Model Info > Units. This will automatically change all of the dimensions in the model to match. You can also change units and create default templates within SketchUp.

How do I change settings in SketchUp?

In SketchUp, you can set a few preferences for how the software works overall and how files are saved. To access these preferences, select Window > Preferences (Windows) or SketchUp > Preferences (MacOS) from the menu bar.


more content related articles
Check these related keywords for more interesting articles :
How to render on cinema 4d
Revit how to join two walls
How to perform dpf regeneration
Product differentiation model definition
3d modeling service provider
3d ribbon model protein
Autocad 3d model from inventor
House tiles design living room
How to bind xref in microstation
How to use autodesk sketchbook lasso
How to save hotlink archicad
How to make tinkercad public
Microstation how to rotate text
Archicad how to create view
Pcb layout techniques of buck converter








Did you find this article relevant to what you were looking for?


Write a comment




How to change length in sketchup


Comment by Loren Buerk

this is a quick video on how to resize the table we drew in our earlier video as you can see this is just a simple 36 by 36 tabletop 29 inches tall and I'm going to make it 60 inches long so these are components leg component skirt component top component so I think the quickest way to do this maybe would be to explode the top using the select tool select this half of the table the move tool will need to add 24 inches if I did my math right so let's move this down 24 inches all right so now then we almost have what we need we just have to make these stretchers so if we edit this component and use the push/pull Tube tool to pull these out oh you can see that we're getting some problems with the end so let's hit the escape right click close the component what we need to do is right-click on this component make it unique and let's delete the extra one so now we reading a unique component we'll use the push/pull to tool we'll pull that end out now then you notice it's the only one will go to this point looks good we'll close that component and then the only thing we have left to do is to copy the skirt to the other side this is located on the center of the leg I'm going to select the move tool hit the control for copy I'm going to zoom in and pick this skirt up by this lower left corner okay so now you can see I have my skirt but I need to get it in the right place well I know it's directly across so I'm going to pull it out sure that I see the green axis I'm going to press the shift key to lock that axis and then I'm going to find a center point on the leg you notice the blue dot on the leg and that should be exactly where I want that skirt so there we have it a quickly resized table using components now if we need to we can triple click that make component and we'll just call this large top and we have quickly resized the table


Thanks for your comment Loren Buerk, have a nice day.
- Dorthea Hores, Staff Member


Comment by tascheG

hello guys welcome back to move a circuit with Sketchup bicycle tutorial how to change dimension and also don't forget to subscribe to our channel here it will be helpful for us to growing up okay for example I will create a simple 3d object we create a rectangle can click a rectangle from this poem with a length about 70 and with about 10 okay and then I will extrude this object to the top here about ft and click on object twice and then make a group here okay I will quite a second object a rectangle here from this point to here with length about 20 and reach about sin and okay and we each choose this object to the top here and I will make this object in a group can hit here next group okay to give a dimension you can click the tool mentioned and clicker from this point to this point and most at the top here like I just go into here move up to the top here and then I will select this point to this point and move to the top here okay you can see think about 90 and a 70 and this object with rang about 20 this is the inimical dimension when you move this object the dimension will be chang you can see chang I will massage object into back here about 30 points and okay and then dimension change into 120 method I also can edit the subject you can click here twice and I really should this surface to here and then you can see language them in two hundred point okay to change this dimension into text you can click at in here twice and type your text like length ok length and enter to finish and then this dimension changing to rank if you want to comment touch with a dimension you can click in here twice and then at Angel bracket then let's hear this a symbol and you'll bracket and enter and you can see here such with a dynamically mentioned here if you move our subject dimension will be change ok can see this is a dynamically dimension to edit this dimension into a different phone or height or even an arrow here you can click windows here and move to the model info and then twist your dimension you can change the patch of font click earphones and you can change the phone here for example I will change the size of the phone here about 16 and ok select all dimension here ok and update selected dimension okay a funny string and for a letters lines you can change into that here update you just change into that and slash update this is less and then push arrows update ok this is for later slimes and for the dimension in Legion to dimension line here outside like I will use the center here update okay when you rotate objects the dimension fashion is not in camera you can see a dimension is in the line not bashing in CHEM as you can into a legend to screen update and dimension is fetching into camera MP okay and for a unit you can change the units into position and comma decimal and Unitarian 2-inch okay millimeter or matter here okay and close to finish okay I think it's enough to day for Sketchup bicycie tutorial how to change dimension in an object if you have any question about this tutorial you can comment below this video and connect them in another stretch of basic effects area


Thanks tascheG your participation is very much appreciated
- Dorthea Hores


About the author