How kriss vector works [Expert Review]



Last updated : Aug 28, 2022
Written by : Sandra Baughn
Current current readers : 4825
Write a comment

How kriss vector works

How does a KRISS Vector operate?

The Vector uses an articulated mechanism referred to as the "Kriss Super V", which allows the bolt and an inertia block to move downward into a recess behind the magazine well. The theory is that at the end of this travel, the energy is transmitted downward rather than rearward, thus reducing the felt recoil.

How does the Kriss Super V work?

The Kriss Super V Vector SMG's operating handle folds flat against the left side of the receiver. Pulling the lever 90 degrees to the receiver allows the shooter to see into the funnel-shaped ejection port. This makes it possible to quickly "press check" the gun without extracting the round from the chamber.

Can you legally own a KRISS Vector?

The KRISS Vector SMG (submachine gun) is a select-fire model only available to qualified LE/MIL units here in the US and overseas. Due to NFA laws, they are never available for individual purchase, and may only be issued to an agency, department, or unit.

How many rounds does a KRISS Vector hold?

The standard magazine holds 10/13 rounds capacity except where restricted by law, in which case a 10 round magazine will be included. Where permitted by law, KRISS has developed an optional extended 25 round magazine in both kit and fully assembled form.

What gun has the fastest fire rate?

According to the Guinness World Records, the machine gun in service with the highest rate of fire is the M134 Minigun. Designed in 1960s, this weapon spat fury from helicopters and armored vehicles. This 7.62mm calibre gun fired at a super fast pace of 6,000 rounds per minute i.e. 100 rounds per second.

How fast does a KRISS Vector shoot?

The Kriss Vector has an extremely fast firing rate of 1,200 rounds per minute. This allows for short pulls of the trigger to deliver a fast burst of pistol-caliber rounds on target at a moment's notice. Even though the weapon has an extremely fast firing rate, the weapon remains easy to control.

Does the KRISS Vector have a suppressor?

The KRISS 4GSK Suppressor is designed for use with the KRISS Vector. The 4GSK has been carefully engineered to deliver outstanding durability, accuracy, and sound reduction.

Do vectors take Glock mags?

The KRISS Mag-Ex Kit 2 is the ultimate capacity extending base plate for your factory standard Glock magazines.

Who uses the KRISS Vector?

In real life, the KRISS Vector submachine gun is used by various military and police units around the world. These include military and law enforcement in the United States, the Indonesian Army, the Royal Thai Army and Royal Thai Police, and the Special Action Force of the Philippine National Police.

Is a KRISS Vector a rifle?

The KRISS Vector CRB with its 16” barrel has an overall length of 35.25". Classified as a rifle, the CRB is configurable to comply with most state's rifle regulation, without any special permits or taxes.

What kind of gun is a vector?

The KRISS Vector is a submachine gun with semi-automatic firing. It uses the KRISS Super V system for its blowback, the first of its kind that transmits recoil downward and upward instead of straight back.

Is a KRISS Vector a pistol?

The Vector CRB is the ideal choice for recreational use and competition in pistol caliber carbine divisions. Like all KRISS Vector firearms, the CRB is fed with full size Glock® magazines, allowing for a wide range of large capacity options.

Is vector gun a pistol?

The Vektor СР1 is a semi-automatic pistol that was made in South Africa by Lyttleton Engineering Works (LIW) now Denel Land Systems, from 1996 to 2001.

Can you put a stock on a KRISS Vector pistol?

The folding stock aids with the storage and transport of your KRISS Vector by reducing the overall length by approximately 9.5" when folded. Includes one pivot pin as pictured. Installing this stock on the Vector SDP will reclassify your pistol as a Short Barrel Rifle.

Which is the No 1 gun in the world?

The AK-47 has succeeded so wildly because it is almost an ideal realization of the personal firearm: where most weapons have had to contend with tradeoffs between accuracy, lethality, speed of fire, reliability, cost of production, and ease of carrying and use, the AK-47 managed to find a sweet spot maximizing these ...

What is the strongest weapon on Earth?

Russia's Tsar bomba: World's most powerful nuclear weapon of mass destruction. The Tsar bomba exploded about 4 km above the ground and reportedly produced a mushroom cloud 60 km high.

What is the fire rate of a Glock 18?

The Glock 18 has a fire rate of over 1,000 rounds per minute.

Is the PPSh a real gun?

The PPSh is a magazine-fed selective-fire submachine gun using an open bolt, blowback action. Made largely of stamped steel, it can be loaded with either a box or drum magazine and fires the 7.62×25mm Tokarev pistol round.

What rounds do Uzis shoot?

"The Uzi Submachine Gun is a standard Uzi with a 10-inch (250 mm) barrel. It has a rate of automatic fire of 600 rounds per minute (rpm) when chambered in 9mm Parabellum; the . 45 ACP model's rate of fire is slower at 500 rpm."

What is a Halbek device?

The Halbek Device is a very unique attachment in Phantom Forces. As its description states, the attachment functionally reverses, or rather inverses the recoil values, meaning instead of the weapon kicking upwards, it kicks downwards instead.


more content related articles
Check these related keywords for more interesting articles :
3d model golf course
How to copy paste revit
3d model hello kitty
3d machine interior design
Kicad how to place vias
How to create mirror texture in cinema 4d
House design modern architecture
How to measure slope in sketchup
How to deposit cheque in boc
How to edit a footprint in altium
Microstation how to combine lines
Sketchup how to select scene
How to move polygon in cinema 4d
How to batch print microstation
How to deselect objects in microstation








Did you find this article relevant to what you were looking for?


Write a comment




How kriss vector works


Comment by Casey Wayson

Thanks for this great article


Thanks for your comment Casey Wayson, have a nice day.
- Sandra Baughn, Staff Member


Comment by alrangarF

Thanks for this interesting article


Thanks alrangarF your participation is very much appreciated
- Sandra Baughn


About the author