Autodesk inventor how to rotate part [Detailed Response]

Last updated : Aug 28, 2022
Written by : Natisha Ringbloom
Current current readers : 8522
Write a comment

Autodesk inventor how to rotate part

How do you rotate a specific angle in Inventor?

In the Angle box, enter the precise angle for the rotation. For an unconstrained rotate, click inside the Angle box, click the rotate preview image, and drag.

How do you rotate a model in Inventor 2021?

  1. In the graphics window double click the view to access the ViewCube. Right-click the ViewCube, and click Custom View Orientation.
  2. A Custom View window opens. On the Custom view tab, click Rotate at Angle.
  3. Use the options in the Incremental View Rotate dialog box to set the model orientation.

How do I rotate something in Autodesk?

Type RO and press enter to start the rotate command, select the spanner, and press enter key again. Click on any point on the spanner and that will become the base point about which the spanner will rotate.

How do I rotate an image in Autodesk Inventor?

To make this happen, right click on the view an select Rotate. This opens the Rotate View Dialog box.

What does F2 do in Inventor?

the model or drawing. be selected, then use F2 to enter rename mode.

How do you rotate an extrusion in Inventor?

To rotate around the selected axis, click a triad axis, and drag. To move in the direction of the arrow, click a triad arrowhead, and drag. To move in the selected plane, click a triad plane, and drag. Click the triad sphere, and drag freely in any direction.

How do you change the XYZ axis in Inventor?

  1. On the axis icon (near the center of the sketch), click the red arrow to realign the x axis, or the green arrow to realign the y axis.
  2. Click a feature edge to rotate the coordinate system. or, Right-click, and select Flip Axis.
  3. Right-click, and select Done.

What is the use of rotate command?

The Rotate command is used to modify the viewing angle of a scene. It has the following format. This rotates by degrees around the axis described by the vector (xAxis, yAxis, zAxis). For example, to rotate a model 90 degrees about the x-axis, use Rotate( 90, 1, 0, 0 ).

How do you rotate an object 90 degrees in Autocad?

Enter “N” at the command line to rotate an object 90-degrees. When using the ROTATE command, instead of entering 90, 180, etc, enter N, W, S, or E to correspond with the directions of a compass – North, West, South, East. Generally speaking, N = 90 degrees, W = 180 degrees, S = 270 degrees, and E = 360 degrees.

How do I change view in Inventor?

Right-click and select Edit View from the menu. In the Drawing View dialog box, on the Components tab, change the options related to the source model, or any of these additional options: Change the model representations. Change the view display style.

What does F7 do in Inventor?

EQUAL / Constrains curves to equal radius or length. F7 SLICE GRAPHICS / Slices away temporarily the portion of the model that obscures the plane. F8 SHOW ALL CONSTRAINTS / Displays all constraints. F9 HIDE ALL CONSTRAINTS / Hides All constraints.

How do you use free orbit in Inventor?

  1. On the Navigation bar click Free Orbit.
  2. Move the mouse left-right to rotate the view about the vertical screen axis.
  3. Move the mouse away or toward you to rotate the view about the horizontal screen axis.

Which quick key is used to automatically adjust the display and reset the display to the isometric view?

You can now select isometric plane for your drawing by pressing the F5 key. The three Isoplanes available for selection are Isoplane top, right and left. Press F5 key to activate Isoplane top and then select line command and click anywhere in the drawing area to start your line.

How do you zoom in on Autodesk?

Use the Zoom command on the standard toolbar to zoom the view in the graphics window in or out to achieve the desired scale. You can zoom the view while other commands are active. Click Zoom or press F3.

How do I change Keybinds in Inventor?

You can create custom shortcuts, or change the default shortcuts to start commands. On the ribbon Tools tab Options panel, click Customize. In the Customize dialog box, Keyboard tab, in the Categories list, click a command category.

How do I select axis in Inventor?

  1. The axis on Inventor has the Y axis pointing up by default.
  2. You can do this by manipulating the viewcube so that the Z axis is pointing upwards.
  3. Once set, right click on the viewcube> Set Current View as> Front.
  4. You might also want to set the home view.

How do I change the XYZ axis in Autocad?

Right-click the UCS icon, and click Rotate Axis. Click X, Y, or Z. As you drag the cursor, the UCS rotates in the positive direction around the specified axis.

How do you move planes in Autodesk Inventor?

  1. If necessary create a new plane.
  2. Drag the new plane to the desired location in the browser.
  3. Right-click the sketch and select Redefine.
  4. Click the new plane for the sketch.

Which command is used to rotate the drawing in different angle?

RO Key command is used to rotate the drawing.

Why do we use flip or rotate command?

Answer. Answer: Flip/rotate command is used to flip or rotate the text in a program .

more content related articles
Check these related keywords for more interesting articles :
Pcb design deep learning
How to do 3d epoxy design
How to merge archicad files
3d model elden ring
Sketchup how to paint groups
Revit how to rotate hatch pattern
How to use smart move in catia v5
Kidney working model information
Cnc jali design for ceiling
Pcb design orcad tutorial
How to change profile picture on tinkercad
How to rotate component in altium pcb layout
Real estate 3d modeling
Sketchup how to make threads
How to rotate object in autodesk inventor

Did you find this article relevant to what you were looking for?

Write a comment

Autodesk inventor how to rotate part

Comment by Lyda Rackers

Thanks for this great article

Thanks for your comment Lyda Rackers, have a nice day.
- Natisha Ringbloom, Staff Member

Comment by Reichou

what's up y'all back again with another video in this one we're gonna talk about some issues that I'm noticing with people that are that are trying to work with solid objects and how to desk inventor as I'm walking around and kind of helping people that I'm teaching I'm noticing people are having no problem create solids but they're having trouble changing them once once they've got them built what the first big problem I'm noticing is people start creating new sketches all over the place I'll have one here and it's finished and then when they're done I'll want to change that again they come back and they press start sketch on the same thing but what you've done is you have some drawings in one sketch and some drawings in the other and they're not going to go or they're not going to be very cohesive so it's good to keep your kind of work area over here in the model tab clean if there are extra empty sketches you can tell when you hover over them nothing's popping up doesn't always do that I don't know if you know so you're gonna be careful and you hover some of these other ones you get different shapes okay so I'm gonna keep this clean over here by deleting any excess sketches that I don't need delete delete great keeping that clean another problem is people are working with the zoom whatever and they go whoops lost my navigation bar how do we get back simple enough you go to view user interface and you have you know complete control over what you can see or not see okay you can lose the model one as one people lose all the time that one on the Left document tab is down at the bottom you can cycle through different documents down here if you have empty part files or different things open so that's the document tabs so on and so forth this is like user interface that I have to set up that I really enjoy is right there right here okay you'll notice that when I I'm cycling through these options over here each extrusion has a different thing that's being highlighted that's because each extrusion is based off of a different sketch and if you hit these drop-down menus you'll see sketch one made extrusion one sketch two which is kind of a cut okay made extrusion to sketch three took a triangle out from right there and sketch for heared some circles and go to some extra circles in there I'm gonna go over that in just a minute how we did that so if you want it if you have something in your sketch and this is this happens all the time if you have something in your sketch that is not you want it to be extruded or you added something else to your sketch and it's not getting cut or it's your it's not doing what you want it to all you have to do is you add it the extrusion okay I'm gonna show you how to do that right now so if you click on the extrusion which is right there and you press edit extrude you notice that only the center circle is going through if you want more of them to go through you click the profile' option and go through and select the additional circles you would like to cut through your object and now we can see I've got three coming out the back of this object here great um if you wanted to change how the extrusion looks you would edit the extrude if you want to change how those circles look you need to go into your sketch so you can click on the sketch and either right click and select edit sketch over here or come over to these buttons and select edit sketch now let's say I wanted to change the circle down here okay if I want to change the circle looks like if I click the hover over I can move my point five zero every different spot it's got a half an inch diameter let's say I want to make that 0.75 inches make this circle a little bit bigger okay you can edit remember any dimension like this one inch you can change that 0.75 if you wanted to seven five and maybe let's make the diameter of this circle I made some people uncomfortable when I did that I think that's okay let's make this 0.75 diameter well you'll notice that circle got a little bit bigger when we press Finn it's finish sketch it automatically updates the extrusion present okay cool so if you want to change how the extrusion looks or how far it goes or wide it is or how far it goes yet at the extrude if you want to change the size of the things that may be extrusion you gotta go into the sketch fantastic okay I'm now gonna go over a couple other smaller tools for drawing things like this that I think are gonna be helpful to you I'm gonna go into a new part file um and that's these right here move copy and rotate so what I'm gonna do is I'm gonna draw kind of let's do something simple but we're gonna make it we're gonna make it kind of cool-looking I guess I'm gonna draw a rectangle now let's say this is a really specific rectangle for a really specifics you know purpose throw in some lines in here maybe a couple more going across let's do like a fancy arc that connects these points having fun yet oh yeah this is great okay coming down but maybe you will want to make that tangent to the circle at the bottom Oh exhausting oh it comes out of the circle I don't know if I like that OCD OCD here here we go let's try the arc tool one more time we could have added a constraint I suppose there oh well we'll call that good enough oh man that was an exhausting to draw I don't want to draw that anymore but I need to make a copy you oh oh I thought you did you reached for ctrl-c and ctrl-v on the keyboard oh don't do that I know what you were thinking watch this yikes they're right on top of each other what a drag I can't even I can't click on anything it's a mess Wow okay how about this how about instead we use the copy option when you press the copy button a dialog box comes up and it says hey what do you want to copy let me help I'm here to help okay you select what you want a copy remember dragging to the right is red means only the things that are completely contained in the red red box are going to be selected okay if you drag to the left everything that's in the green box gets selected okay so you'd same with down here okay everything in the green box only the things completely contained let's go back to our copy I want to completely copy the shape I'm gonna use my green selection tool and then the base point is from which you're going to copy it doesn't have to be on the figure you click pick your hand up off the trackpad you can drag to where you want and you can every time you click you can create a copy of that figure boom bada bing nice job looks beautiful uh-oh this one's off let's move it so it looks a little more orderly move tool same thing gonna so let's do this oh dear what have I done if you want to individually select lines you can hold control to go through and click each object that is also a way to select individual parts of pieces who I want to take that one out ooh click it again there you got okay select move it's already got that as its selection you could use control their base point click where you'd like you can click and drag this will not make a copy just move the one that you've selected the last tool is rotate so you can make a selection of

Thanks Reichou your participation is very much appreciated
- Natisha Ringbloom

About the author